FULLY RECONDITIONED FLECK 5600 METERED CONTROL VALVE

Description

FULLY RECONDITIONED FLECK 5600 METERED CONTROL VALVE
**PLEASE READ THE ENTIRE LISTING BEFORE PURCHASING TO LIMIT ANY ORDERING ISSUES
Reconditioned Fleck Valves have been gone through completely and are tested before they are sent out. Parts that are typically replaced include: Piston assembly, seal spacer kit, brine piston, motor, all o-rings, meter dome, and broken gears.
MUST SPECIFY 24V OR 110V MOTOR - If no Motor is chosen 110v will be sent.
•
110v Power Cord included if choosing 110v Motor.
• 24v Transformer not included if choosing 24v Motor - May be purchased from our Ebay store if needed.
Items NOT included - Valve Cover, Bypass, Manual, Yoke, Brine Fittings.
A BYPASS OR YOKE ADAPTER IS REQUIRED TO ATTACH THE VALVE TO YOUR PLUMBING - AS STATED THE VALVE SENT DOES NOT INCLUDE A BYPASS OR YOKE ADAPTER BUT THEY ARE AVAILABLE IN OUR EBAY STORE IN EITHER 3/4" OR 1".
VALVE DOES NOT COME WITH A WEATHER COVER OR ANY TYPE OF COVER - COVER IS AVAILABLE FOR PURCHASE IN OUR EBAY STORE
**FEEL FREE TO ASK ANY QUESTIONS BEFORE PURCHASING.
Listing Includes - Control Valve and Upper Basket.
• The first Valve pictured in this listing is the L-Bracket style valve and the valve sent may not look like the valve pictured - these valves are reconditioned not new so the cosmetic appearance varies on our inventory.
• The second valve pictured is the Traditional style valve.
The difference between the "L" Bracket and traditional valve is purely cosmetic (The main difference is they use different weather covers - the traditional valve cover will not fit on the L bracket valve and th L bracket cover will not fit on traditional valve), other than that they operate and connect exactly the same.
The riser size is either 1.05" or 13/16" outside diameter, you may request a size and it will be shipped if we have it in stock. If no riser size is chosen we will ship the 1.05" riser.
The riser is the PVC tube inside of your Treatment tank - the valve has to be removed (unscrewed) from the tank in order to check the riser size. 95% of Fleck valves are the 1.05" riser so it is likely that you have the 1.05" riser - all valves can be converted to either size riser by adding an insert or simply removing the insert.
If you want a certain valve (traditional style or L bracket style) you may request it, but we cannot guarantee it will be shipped - our stock varies and if no valve style is selected we will ship whichever is in stock.
30 Day Warranty Included against Defects on parts that were replaced - Buyer is responsible for the return shipping on defects or valve problems that require it to be sent back.
This is a reconditioned (used) valve (seals and wearable parts have been replaced), but the valve body and majority of valve is used so we cannot guarantee the valve body, power head, plumbing connections, or parts that were not replaced against any defects (since it is used).
All valves are wet tested and pressurized before they are sent out and will not be sent if they are leaking.
VALVE INFORMATION
-Reduces water to drain 29 gallons per regeneration · Mechanical Meter monitors water usage even during power failure and initiates regeneration only when needed · 6 cycle adjustable downflow brining controls · Constructed of Noryl · Flow rates up to 24 gpm Valve Material Noryl®
-Flow rates (50 PSI Inlet) - Valve Alone
-Continuous (15 PSI Drop) 20 gpm Peak (25 PSI Drop) 26 gpm
-Max Backwash (25 PSI Drop) 7 gpm Regeneration
-Downflow/Upflow Both
-Adjustable Time of regen and brine flow only.
-Time Available 120 minutes Meter Information Meter Accuracy Range .25 - 15 gpm +/- 5%
-Meter Capacity Range Standard: 125-2,125 gal.
Dimensions
-Distributor Pilot 13/16" or 1" (1.050) Pipe O.D.
-Drain Line 1/2" NPT (Female)
-Brine Line 3/8"
-Mounting Base 2-1/2"-8 NPSM Height from top of tank 7"
-Additional Information Electrical Rating 24v, 110v, 60Hz
-Pressure Hydrostatic: 300 PSI
-Working: 20 - 120 PSI
-Temperature Range 34° - 110° F