Flex Seal Shot Rubber Adhesive Sealant Caulk, 8 oz, White

Description

Caulks, bonds and seals virtually everything
Forms a watertight, flexible barrier that is easy to use
No running, dripping or mess
No caulking gun needed, just push the nozzle for a perfect bead every time
Perfect for sinks, tubs, windows, doors, and more
Flex Shot
is a super thick rubber sealant that Flex Shot forms a watertight, flexible barrier and is so easy to use. Just push the nozzle and never shrinks or cracks. Messy caulks dry out, but with Flex Shot. Flex Shot won’t fade, dry, crack, yellow or deteriorate over time and last up to 30 years. It’s available in mildew-resistant white, almond, clear and black. Flex Shot is great for bathroom windows, tiles, showers, tubs, and toilet repairs. But it doesn’t stop there, use Flex Shot on all your arts and crafts, and decorative items. Flex Shot is the most easy to use adhesive sealant that provides a leak proof, strong bond seal. Caulk, Bond, and Seal.
Common Flex Shot Applications
include bathroom showers, bathtubs, and toilet repairs, seal kitchen and bathroom sinks and faucets, replace worn out or missing tile caulking, fill large and small holes that cause leaks, seal and repair window and doorsills, crafts, and decorative items.
Recommended Surfaces
include porcelain, tile, metal, glass, fiberglass, wood, granite, stone, marble, fabric, upholstery, paper, and just about any other surface that’s free of grease and oil.
Ingredients
Contains: Dimethylsiloxane (CAS 70131-67-8), Silica (CAS No. 7631-86-9), Methyltriacetoxysilane (CAS No.4253-34-3), Ethyltriacetoxysilane (CAS No.17689-77-9), Petroleum Distillates(CAS No. 64742-46-7), Diflouroethane (CAS No. 75-37-6).
Directions
Instructions:
. Directions for Use:. 1. All surfaces must be clean, dry and free from dirt, grease and oil. 2. Hold can at 45° angle, push against the nozzle side and apply into the joint or seam to obtain full contact between surfaces. 3. Flex Shot® can be smoothed within 5 minutes of application. Remove excess immediately with a dry paper towel. 4. Sealant forms a tack free skin in 20 minutes. Length of dry time depends upon temperature and humidity usually cure within 24 to 48 hours. 5. After using, extend a small amount of material beyond the end of the nozzle. This will cure form a seal for the remaining material. Pull out this cured plug when you are ready to use again.